Guide
Installation.
All Arcée mains fittings — Mono, Mono Mini and Duo — are 240V and must be installed by a licensed electrician in accordance with Australian standards and local regulations.
Installation video
Arcée Wall Sconce — Installation Guide (AU)
This video shows the recommended installation process for the Arcée wall sconce, including mounting, wiring connection and final fit-off.
Safety: Electrical connection must be completed by a licensed electrician
Linear — 24V
Linear installation.
The Linear is a 24V fitting with a remote driver. The electrician connects the driver to mains, wires the low-voltage run to the fixture, and issues a Certificate of Compliance for the connection.
Driver location, run length and dimming compatibility should be confirmed with the studio prior to install. Contact hello@arcee.au for the driver spec sheet.
Installation
What you need to install and maintain your Arcée fitting.
What's in the box
Fixture, mounting plate, fixings and installation card included. Globe not supplied — see Lamping.
Mounting
Mounts to a standard Australian electrical box or solid substrate with the supplied fixings. Must sit flush and level.
Wiring
240V — installation must be carried out by a licensed electrician. Full wiring details are on the enclosed installation card.
Lamping
GU10 lamp, max 30W. Dimmable with a dimmable globe and compatible trailing-edge dimmer. Globe not supplied.
Care
Wipe with a soft, dry cloth. Avoid abrasive cleaners and solvents. Surface variation is part of the hand-cast finish.
Warranty
12 month warranty on fixture and finish, subject to installation by a licensed electrician.
Need assistance?
Contact hello@arcee.au
Final installation copy is being finalised — this page will be updated with the complete guide shortly.